Weber Joint Grout

Cementitious tile grout is a cement-based pre-mixed non-shrink grout, used for filling tile joints in wet and dry areas. is water resistant, easy to apply, and can be cleaned easily. It is a thixotropic, crack-free, non-slump grout that only needs to be mixed with water. It is also available in a wide range of attractive colors (please consult our color chart board). Surface of application External floor, Floor, Roof, Wall Features and Benefits  Easy to apply and clean Thixotropic Non-slump grouts Water-resistant Non-shrink grout Crack-free Only needs to be mixed with water Large range of colors Things to consider :  Mixing water ratio as per the datasheet weber-joint thin for joint width 1 to 4mm weber-joint thick for joint width 4 to 8mm Apply 24 hours minimum after standard tile adhesive application Apply 4 hours minimum after fast-setting tile adhesives application Apply 14 days minimum after tiling with traditional “site-mix” mortar on floors (minimum 3 days for walls) The substrate must be fully cured, set, and dry prior to grouting All traces of oil or grease must be removed All loose particles of mortar or tile adhesive in the groove must be physically removed (joints should be emptied to at least 2/3 of the tile thickness) Avoid excess water while cleaning to prevent discoloration of joints It is recommended to use a moist sponge rather than excessive water pouring for cleaning the tiles and the dried grouts Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application